LetterRip.net 1 The decal is covered with a clear “application tape” that allows you to transfer the decal to the application surface. To make sure the decal will stick to the application tape (and not the paper) apply pressure to the entire decal using a squeegee, credit card, 2 Thoroughly clean the area where the decal is to be applied. 3 Then peel the paper backing off making sure the decal sticks to the application tape that is on the front of the decal. 4 Once the decal is where you want it, apply pressure to all of the decal. You may use a squeegee or credit card. 5 Remove the application tape. Start at a corner and slowly pull back, PARALLEL to the surface. DO NOT pull away from the surface.